Advertisement
Installing the Cisco NCS 4216
SUMMARY STEPS
1. Turn the knob to unlock the door.
2. Swing the door open.
3. Remove the ground cable from the shelf by removing the screw.
4. Pull the top hinge pin holding the door to the chassis, in the downward direction.
5. Lift the door out of the bottom hinge pin to remove the door from its hinges.
DETAILED STEPS
Step 1
Turn the knob to unlock the door.
Step 2
Swing the door open.
Step 3
Remove the ground cable from the shelf by removing the screw.
Step 4
Pull the top hinge pin holding the door to the chassis, in the downward direction.
Step 5
Lift the door out of the bottom hinge pin to remove the door from its hinges.
Installing the Patch Panel on the Rack
This procedure installs the Patch Panel on the Rack.
SUMMARY STEPS
1. Assemble the patch panels on the opposite side of the rack to make the cable routing process easy.
2. Fix one patch panel with a minimum of two screws on each side.
Installing the Patch Panel on the Rack
Cisco NCS 4216 Hardware Installation Guide
11
Advertisement
