Install Condiment Holders And Work Surfaces; Check For Gas Leaks - Weber Summit 625 Step-By-Step Manual

INSTALL CONDIMENT
HOLDERS AND WORK
SURFACES
You will need: two condiment holders and two stainless
steel work surfaces.
Place the condiment holders on the ends of the frame.
Set the work surfaces on top of the condiment holders
and the barbecue frame. Figure 18.
Figure 18

CHECK FOR GAS LEAKS

The gas connections of your Weber Gas
Barbecue have been factory tested. We do
h ow ever recommend that you leak ch e ck all
gas connections before operating yo u r
Weber Gas Barbecue.
Remove burner control knobs, control panel
and front panel
Remove the burner control knobs. The control panel is
separate from the front panel. The control panel needs to
be removed before the front panel can be removed.
Figure 19.
Control
panel
Front
panel
Put your fingers under the front edge of the control panel,
lift up, and pull evenly toward you. Figure 20 (a).
Front edge of the
control panel
(a)
10
WARNING
Figure 19
Front Panel
Control Panel
Figure 20