Table of Contents
Advertisement
TOOLS NEEDED
7/16 and 3/4 inch open end or an adjustable wrench
SUPPLIES NEEDED
Your LP tank is shipped empty for safety. After setting the
LP fuel scale you will need to fill it. (See Step "Fill LP t a n k . " )
You will need a soap and water solution to check for gas
leaks. (See Step "Check for gas leaks.")
Note - The hardware size of nuts, bolts and screws is
given. For example "1/4-20 x 2 inch bolt" means a bolt
1/4 inch in diameter with 20 threads to the inch, 2 inches
long. On a small screw for example, "6-32 x 1/2 inch
screw" means a number 6 screw, with 32 threads to the
inch, 1/2 inch long.
While we give much attention to our products,
unfortunately an occasional error may occur. If a part
is missing, do not go back to the store. Call the Weber
Customer Service Center toll free 1-888-33-SUMMIT
(1-888-337-8664) to receive immediate assistance.
Have your owner 's manual and serial number of the
barbecue available for reference.
Note: If you are interested in installing a
Summit 4 burner or 6 burner into a built-in
unit, call 1-888-33-SUMMIT for warnings,
dimensions, and installation instructions
for the Summit 475 or 675.
REMOVE PACKAGED
CONTENTS
Right panel
(Summit 450 and 650 only)
1/4-20 x 1/2 inch bolt (2)
Nylon washer (4)
Plastic plug (2)
(Summit 450 or 650 only)
1/4-20 keps nut (2)
Flavorizer bar
(7) (Summit 425 or 450)
(11) (Summit 625 or 650)
Optional Steam-N-Chips smoker
Note: If you use the Steam-N-
Chips Smoker, you will be
removing one of the Flavorizer
bars. You have a full set of
Flavorizer bars to use when not
using the Steam-N-Chips smoker.
Cooking grate
(2) (Summit 425 or 450)
(3) (Summit 625 or 650)
Warm-up basket
Burner control knob
(4) (Summit 425 or 450)
(6) (Summit 625 or 650)
Bottom tray
3
Advertisement
Table of Contents
