Gas Instructions; Install The Fuel Scale Assembly - Weber Summit E-470 Owner's Manual

REPLACEMENT HOSE, REGULATOR AND VALVE ASSEMBLY
m IMPORTANT NOTICE: We recommend that you replace the
gas hose assembly on your Weber
years. Some countries may have requirements that the gas
hose be replaced within less than 5 years, in which case that
country's requirement would take precedence.
For replacement hose, regulator, and valve assemblies,
contact the Customer Service Representative in your area
using the contact information on our web site.
Log on to www.weber.com.

INSTALL THE FUEL SCALE ASSEMBLY

A) Position the fuel scale on the right outside panel of the barbecue (1) . Fasten with
washers and nuts .
B) Install the cylinder glides into the two holes below the fuel scale (2) . Fasten with
screws, washers and nuts .
◆
8

GAS INSTRUCTIONS

gas barbecue every 5
®
470 DIMENSIONS
127 cm
93 cm
Gas Connection Right Hand Side of barbecue
The minimum cylinder capacity for this barbeque is 9 Kg
FUEL SCALE ASSEMBLY & HARDWARE
51 cm
1
2