Crossover ® Ignition System Operations; Replace Igniter Batteries - Weber SUMMIT 38008 Owner's Manual

36
CROSSOVER IGNITION SYSTEM OPERATIONS
®
®
If the Crossover ignition system fails to ignite the LEFT burner in a burner
set, light the LEFT burner with a match. If the LEFT burner lights with a
match, then check the Crossover
• Check that both ignition wires(1,2) are attached properly.
®
• Check that the Crossover
• You should hear the igniter sparking.
®
If the Crossover ignition system still fails to light, contact the Customer
Service Representative in your area using the contact information on our
web site. Log onto www.weber.com

REPLACE IGNITER BATTERIES

Parts required: 1 AA alkaline battery per igniter.
Unscrew igniter button from top of control panel. Remove igniter button
and contact spring. Remove old battery and replace with a new AA alkaline
battery. Positive end(1) of battery faces up as shown in illustration. Replace
spring contact(2) and screw igniter button(3) back down.
MAINTENANCE
®
ignition system.
ignition button is activating.
® .
(1 )
(2 )