Reinstall Control Panel - Weber SUMMIT 38008 Owner's Manual

10

REINSTALL CONTROL PANEL

Parts required: control panel, screws, and burner control knobs.
Place the control panel back onto the control panel brackets on either side of
the front of the cooking box.
Line up screws with screw holes on both the control panel and control panel
brackets. Tighten screws.
Reinstall burner control knobs & igniter wires (if necessary).
Place corresponding control knobs down onto the valve stems. From the
underside of the control panel, replace the two wires (1, 2) of each igniter.
GAS INSTRUCTIONS
(1)
(2)
Gold A4
a
b
a = Yellow Tab with Black Wire
b = White Tab with Black Wire
Gold C4
c
a d
b
a = Blue Tab with Black Wire
b = Yellow Tab with Black Wire
c = White Tab with Black Wire
d = Solid White Wire
Gold B4
a
c
d
b
a = Yellow Tab with Black Wire
b = White Tab with Black Wire
c = Solid White Wire
d = Grounding Wire
Gold D4
e f
c
a
d
b
a = Blue Tab with Black Wire
b = Yellow Tab with Black Wire
c = White Tab with Black Wire
d = Solid White Wire
e = Solid Blue Wire
f = Grounding Wire