Button Sewing - Janome Memory Craft 9850 Instruction Book

w
q
e
r

Button sewing

Attaching button sewing foot T
Insert the rear pin of the foot into the rear groove of the
q Rear pin
w Rear groove
Gently lower the presser foot lifter while holding the foot
Place a button on the fabric and lower the needle into the
left hole of the button by turning the handwheel with your
Lower the foot to hold the button in place, aligning the
Raise the needle by turning the handwheel until the
Press the "+" or "–" key so the needle enters into the right
Start sewing and continue until the machine stops auto-
Pass the needle thread at the end of stitching through the
Pull the bobbin thread to bring the needle thread down to
e Needle thread at the end
r Bobbin thread
Tie the threads together
68