Changing Sewing Direction - Janome Memory Craft 9850 Instruction Book

q
w
Utility Stitches
Straight stitches
NOTE:
patterns U1, U2 or U3, and use straight stitch needle
plate (optional item) for better sewing result (refer to page
Starting to sew
Place the fabric next to a seam guide line on the needle
Pull the needle thread towards the rear and lower the
Gently guide the fabric along the seam guide line letting
q Start/stop button
NOTES:
bobbin holder, you can start sewing without
Sewing from the edge of thick fabric
The black button on the zigzag foot locks the foot in the
This is helpful when you start sewing at the extreme edge
Lower the needle into the fabric at the point where you
After a few stitches, the black button is released
w Black button

Changing sewing direction

Stop the machine and raise the presser foot lifter to raise
Pivot the fabric around the needle to change the sewing
Turning a square corner
Stop sewing when the front edge of fabric reaches the
Raise the presser foot lifter and turn the fabric 90
e
e Cornering guide
27