Table of Contents
Advertisement
w
q
e
4
q
w
e
4
r
w
q
Button Sewing
q Stitch pattern:
w Thread tension dial: 3 to 7
e Presser foot:
r Feed dog:
Lower the feed dog (refer to page 13).
Set the speed control slider at a slower speed.
Match the holes of button to the horizontal slot of the
presser foot and lower the foot to hold the button in place.
Press the mode key q to select the stitch width
adjustment mode (
Adjust the stitch width so the needle will enter the left
hole of the button.
Turn the handwheel so that the needle will enter the
right hole of the button. Readjust the stitch width if
necessary.
q Mode key
w Stitch width (adjust to span of holes)
Stitch several times.
After you finish sewing, cut the thread but leave 4˝ (10
cm) of threads at the end.
Pull the bobbin thread to draw the top thread to the
reverse side of the fabric and knot the threads.
After the button sewing is completed, raise the feed dogs
for normal sewing.
Return the speed control slider position.
Attaching Elastic
q Stitch pattern:
w Thread tension dial: 1 to 4
e Presser foot:
Mark the elastic into quarters. Match those to the center
front, center back and side seams, and pin the elastic to
the fabric.
Place the elastic under the foot and stitch into place while
stretch the elastic evenly.
37
07
Satin stitch foot F
Lowered
).
16
Satin stitch foot F
Advertisement
Table of Contents
