Table of Contents
Advertisement
q
w
C
r
2
t
Button Sewing
q Pattern selector:
w Presser foot:
e
e Thread tension:
r Stitch length:
t Stitch width:
t
y Feed dog:
Drop the feed dogs. Match the holes in a button
with the horizontal slot on the Presser foot. Adjust
stitch width matching the distance of the holes
on the button. Lower the foot to hold the button in
place. Check to see if the needle enters into the
holes on the button by turning the handwheel by
hand. Sew about ten (10) stitches.
To strengthen the shank, cut the threads leaving
about 4.0˝ (10.0 cm). Bring the needle thread
down through one of the holes on the button and
wind it around the shank. Bring the needle thread
to the wrong side (bottom side) and knot.
After button sewing is completed, raise the feed
dogs for normal sewing.
40
C
Satin stitch foot
2–6
Any
Adjust as necessary
Dropped
Advertisement
Table of Contents
