Replacing The Foot Holder - Janome Memory Craft 9850 Instruction Book

w
q
e
q

Replacing the Foot Holder

Replace the foot holder, if you use the darning foot or em-
CAUTION:
Press the lockout key to lockout the machine or turn the
Removing the presser foot holder
Press the lockout key and raise the presser foot with the
q Lockout key
w Presser foot lifter
Loosen the thumbscrew and remove the presser foot
e Thumbscrew
Attaching the darning foot PD-H
Attach the darning foot PD-H to the presser bar by putting
w
q Pin
w Needle clamp screw
Attaching the embroidery foot P
Attach the embroidery foot P to the presser bar from
18