Set Telephone Base RNger; Set Remote Access Code - VTech CS5123 User Manual

• The handset
rnger volume s
set separately.
See page 9 for
detals.
34
Answering system
Set telephone base ringer
Ths feature allows you to select the telephone base rnger volume level.
1. Press SET UP when n dle mode untl the system announces the telephone
base rnger settng. There are three levels: HI (hgh), OF (off) and LO (low).
2. Press /SKIP or /REPEAT untl the system announces the desred telephone
base rnger volume level, then press SET UP to save the settng and go to the
next settng, or press

Set remote access code

A two-dgt securty code s requred to access the answerng system from any
touch tone telephone. The preset code s 19. You can set the remote access
code from 10 to 99.
To set the remote access code:
Press SET UP when n dle mode untl the system announces the remote
1.
access code settng.
2. Press /SKIP or /REPEAT to change the remote access code by one, or
press and hold /SKIP or /REPEAT to change t by ncrements of ten.
SET UP to save the settng and go to the next settng, or press
to save and return to the dle mode.
www.vtechphones.com
/PLAY/STOP to save and return to the dle mode.
Press Press
/PLAY/STOP