ActVate The AnswerNg System; Set The Clock - VTech CS5123 User Manual

• If you have caller
ID servce the
clock wll be set
automatcally wth
ncomng calls,
but you wll need
to make sure the
year s correct.
• Press and hold
/SKIP or
/REPEAT
whle settng
the mnutes or
year to advance
or decrease by
ncrements of ten.
32
Answering system
Activate the answering system
The answerng system must be turned on to answer and record messages.
If the answerng system s turned on, the ANS ON/OFF lght wll be on. Press
ANS ON/OFF to turn the answerng system off or on.

Set the clock

Before playng each message, the answerng system announces the day and
tme of the message receved. Before usng the answerng system, set the day,
tme and year, so that messages are dated correctly. If the clock s not set before
new messages are recorded, the system wll announce "Time and day not set."
before each message s played to remnd you to set the clock.
Press CLOCK. The system announces the clock settng (e.g. day, tme and
1.
year), then announces: "To set the clock, press CLOCK."
2. Press CLOCK. The system announces the current day.
Press /SKIP or /REPEAT untl the system announces the correct day, then
3.
press CLOCK. The system announces the current hour.
Press /SKIP or /REPEAT untl the system announces the correct hour, then
4.
press CLOCK. The system announces the current mnute.
/SKIP or /REPEAT untl the system announces the correct mnute,
5. Press
then press CLOCK. The system announces the current year.
6. Press /SKIP or /REPEAT untl the system announces the correct year, then
press CLOCK. The system announces the current clock settng and exts the
clock menu.
www.vtechphones.com