Activate The Answering System; Set Number Of Rings; Set Telephone Base Date And TMe - VTech VTRZ6052 - 6052 User Manual

answering system operation

activate the answering system

The aNS oN/oFF must be on (the button light will be on) in order for the
• When aNS oN/oFF machne to answer calls and record messages. If the button lght s off then
s turned off, your
calls wll not be answered.
telephone wll rng
To turn on/off the answerng system, press aNS oN/oFF to choose between
10 tmes before
on and off.
answerng and
promptng for the Use the volume control button on the telephone base to adjust the volume
remote access
at anytme durng the setup procedure.
code.

Set number of rings

Ths feature allows you to select the number of tmes the telephone rngs before the answerng system
answers. You can choose from two, four, sx, eght rngs or toll saver. When toll saver s actvated, the
answerng system answers after two rngs when there are new messages, and after sx rngs when
there are no new messages.
• Press No. oF rINgS when n dle mode and the system announces the current settng.
• The system announces "To change the setting, press number of rings again."
• Press No. oF rINgS repeatedly untl the desred settng s announced. If you do not press the
Set telephone base date and time
The answerng system announces the day and tme the message was receved before playng each
message. Set the date and tme before usng the answerng system so all messages are dated correctly.
Settng handset date and tme wll smultaneously update the telephone base date and tme.
The system wll announce " Please set the handset clock" before message playback f you do not set
the date and tme before usng ths system.
28
aNNC button for about two seconds, the setting will be saved and there is a confirmation beep.
www.vtechphones.com