Table of Contents
Advertisement
!
WARNING!
• The recoil spring is under tension when in its housing
in the starter and can, with careless handling, fly out
and cause personal injury.
• Care should be exercised when replacing the recoil
spring or starter cord. Wear protective glasses.
Dismantling
1.
Unscrew the four bolts that hold the starter (A) and cooling
air guide (B) in position.
2.
Pull out the handle 20-30 cm (8-12") and lift up the cord
from the cut-out in the starter pulley.
3.
Unscrew the centre bolt and lift out the washer and starter
pulley.
4.
Carefully lift up the spring housing so that the spring does
not fly out and cause personal injury.
5.
If the starter cord is to be replaced, cut it off and pull out the
ends, using a pair of thin-nosed pliers, from the handle and
starter pulley.
STARTER
A
B
19
English –
Hide quick links:
Advertisement
Table of Contents
