Husqvarna 335XPT Workshop Manual page 35

Replacing the tank ventilator, oil tank
1. Pull out the ventilator's rubber fastener using a pair of
pliers.
2. Fit a new pin, vyon-plug and valve in a new rubber fastener,
place the unit in the hole in the tank from the outside.
3. Pull in the ventilator with fitted vyon-plug and pin using a
pair of long-nosed pliers from inside the tank.
Replacing the pulse tube
1. Pull out the old pulse tube using a pair of pliers.
2. Insert a new pulse tube from the carburettor side and
carefully pull it in from the engine side.
TANK UNIT
35
English –