Table of Contents
Advertisement
!
WARNING!
The fuel used in the chain saw poses the
following hazards:
• The fluid and its vapours are poisonous.
• Can cause skin irritation.
• Is highly inflammable.
Dismantling
Dismantle the following parts:
1.
Chain and bar. See the Operator's manual.
2.
Centrifugal clutch. See page 23.
3.
Muffler. See page 16.
4.
Carburettor. See page 27.
5.
Starter. See page 19.
6.
Ignition system and spark plug. See page 21.
Now continue to dismantle the tank unit according to the
following instructions:
1.
Drain out all oil and fuel.
2.
Remove bolt (A) and the pulse tube (B).
3.
Remove the bolts (C) and the exhaust guide plate (D).
4.
Press the manifold pipe into the hole on the tank unit at the
same time as you push the engine unit towards the clutch
side.
5.
Now loosen the oil pipe (E).
Cleaning and inspection
Clean all parts and check that the fuel pipe and oil pipe are OK.
TANK UNIT
B
D
C
A
C
C
E
33
English –
Hide quick links:
Advertisement
Table of Contents
