Dismantling
!
WARNING!
The fuel used in the chain saw poses the
following hazards:
• The fluid and its vapours are poisonous.
• Can cause skin irritation.
• Is highly inflammable.
1.
Dismantle the chain and bar. See the Operator's manual.
2.
Dismantle the carburettor cover (R).
3.
Dismantle the air filter (S), the two bolts and the air filter
holder (U).
4.
Slide out the choke control (Y) by using a screwdriver.
5.
Pull off the fuel pipe (V) by using a pair of thin-nosed pliers.
6.
Pull out the carburettor a little and unhook the throttle
control (X). Now pull out the carburettor fully.
Continue dismantling from point 7 on the next page.
CARBURETTOR
R
X
Y
V
U
S
27
English –