Menu Features; Outgoing Announcement; Record Outgoing Announcement - VTech MI6896 User Manual

Answering system operation

Menu features

System announces
Announcements
Remote access code
Message alert
Announcement only,
record no message
Base ringer
Number of rings

Outgoing announcement

Your answering system is pre-programmed with an announcements
for normal (answer and record) mode and announcement only mode
If the phone is set up to record messages, the phone answers calls
with "Hello. Please leave a message after the tone." You can use this
announcement, or replace it with a recording of your own

Record outgoing announcement

 Press SETUP, the system announces "Announcement. Press PLAY
or press RECORD. To continue set up, press SETUP."
2 Press REC/MEMO After you hear "Record after the tone. Press
STOP when you are done," speak toward the MIC to record an
announcement for up to 90 seconds
3 The elapsed time (in seconds) is shown in the message window
when recording
34
Description
Outgoing message to tell callers to leave a message
Set code to access remotely from a touch tone phone
Beeps every 0 seconds when there are new messages
Outgoing message only No recording of incoming messages
Turn base ringer on or off
Change the number of times the system rings before it answers a
call, (2, 4, 6 or toll saver)
www.vtechphones.com