Answering system operation
Menu features
System Announces
Announcements
Remote access code
Message alert
Announcement only,
record no message
Base ringer
Number of rings
Outgoing announcement
Your telephone answering system is pre-programmed with an
announcements for normal (answer and record) mode and for
announcement only mode If the phone is set up to record messages,
the phone answers calls with "Hello. Please leave a message after
the tone" You can use this announcement, or replace it with your
own recording
Record outgoing announcement
1 Press SETUP, the system announces "Announcement. Press PLAY
or press RECORD. To continue set up, press SETUP."
Description
Outgoing message to tell callers to leave a message
Set code to access remotely from a touch tone phone
Beeps every 10 seconds when there are new messages
Outgoing message only No recording of incoming messages
Turn base ringer on or off
Answering machine picks up after 2, 4, or 6 rings (Or set to toll saver
mode (see page 37)
www vtechphones com
• You can
record an
announcement
for up to 90
seconds
Announcements
shorter than 3
seconds will not
be recorded
29