Cisco Catalyst 2900 XL Series Installation And Configuration Manual page 78

Supported Cisco IOS Commands
Table B-2
Command
show lane le-arp
show lane name
show line
show location
show logging
show memory
show privilege
show processes
show registry
show reload
show running-config
show sscop
show stacks
B-22
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide
Supported Cisco IOS Commands (Continued)
Description
Displays the LANE ARP
table of the LANE client
configured on an interface or
on an emulated LAN.
Identifies the ELAN name.
Displays connection
information for a line running
in asychronous mode.
Displays the system location.
Displays the state of logging
(syslog).
Shows statistics about
memory, including
memory-free pool statistics.
Displays your current
privilege level.
Displays information about
the active processes.
Displays function registry
information.
Displays the reload status of
the module.
Displays the configuration
information currently running
on the terminal.
Shows Service-Specific
Connection Oriented Protocol
(SSCOP) details for all ATM
interfaces.
Monitors the stack utilization
of processes and interrupt
routines.
1 2
Type Mode
IOS/LAN EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
Switch P
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC