Cisco Catalyst 2900 XL Series Installation And Configuration Manual page 73

Table B-2 Supported Cisco IOS Commands (Continued)
Command
atm uni-version
banner
clear atm vc
clear counters
clear interface
clear lane le-arp
clear line
configure
description
debug atm
debug lane
debug packet
debug sscop
Description
Specifies the UNI version 3.0
or 3.1 the router should use
when ILMI link
autodetermination is
unsuccessful or ILMI is
disabled.
Defines a login banner.
Clears a specified SVC.
Clears Media Access Control
(MAC) and port counters.
Resets the hardware logic on
an interface.
Clears the dynamic LANE
Address Resolution Protocol
(LE_ARP) table or a single
LE_ ARP entry of the LANE
client.
Returns a terminal to idle
state.
Enters global configuration
mode.
Adds a description to an
interface configuration.
Displays ATM errors.
Displays ATM events.
Displays information on
packets that the network
cannot classify.
Enables debugging for the
Service Specific Connection
Oriented Protocol (SSCOP).
1
Type Mode
IOS/ATM IC
IOS/ATM EXEC
IOS/ATM IC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/LAN EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM IC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
IOS/ATM EXEC
Command Reference B-17
2