Taiwan; Lane Configuration Requirements - Cisco Catalyst 2900 XL Series Installation And Configuration Manual

LANE Configuration Requirements

Taiwan

LANE Configuration Requirements
Before you configure the LANE client, ensure that the device you are connecting to the
ATM module is configured as one of the following LANE servers:
LANE broadcast-and-unknown server
(BUS)
LANE configuration server
(LECS)
LANE server
(LES)
After LESs are properly configured, you can connect the devices to the ATM module.
Record the VLAN ID numbers and ELAN names that are configured in the LECS. You will
need this information when you configure the ATM module LANE client.
2-2
Catalyst 2900 Series XL ATM Modules Installation and Configuration Guide
Multicast server that floods traffic addressed to
an unknown destination in emulated LANs
(ELANs). It also forwards multicast and
broadcast traffic to the appropriate clients.
Database server that assigns a LANE client to
particular ELANs by directing them to the
LANE server (LES) that corresponds to the
ELAN. There is one logical LECS per
administrative domain. This serves all ELANs
within that domain.
LANE server that implements the control
function for a particular ELAN. There is only
one logical LES per ELAN. It is identified by a
unique ATM address.