Base Operation; Temporary Tone Dialing; Message Waiting - VTech IA5864 User Manual

Telephone Operation

Temporary Tone Dialing

If you have pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call
by pressing * TONE. This is useful if you need to send touch tone signals for access to telephone
banking or long distance services.

Message Waiting

Your phone is designed to work with most local and regional telephone service provider's voice
messaging systems to provide an alert on handset when new messages come in. Voice messaging is
a subscription service, available through most service providers for a monthly fee. Contact your local
telephone company for more information.
12 BASIC OPERATION
11 12
1. Dial the number.
2. Press * TONE. Buttons pressed after this send touch tone signals.
3. After you hang up, the phone automatically returns to pulse service.
www.vtechphones.com

Base Operation

11. CHARGE/IN USE
• Flashes in unison with an incoming call's ringing.
• Flashes slowly when the handset is in use, or the answering
system is answering a call.
• Glows steadily when the handset is charging.
12. LOCATE HANDSET
Press to page the handset for up to 60 seconds. Press again,
press OFF on handset or place handset in base to cancel the
page.