Telephone Directory; Store A Number/Name In The Directory; Edit A Number/Name Stored In The Directory - VTech IA5864 User Manual

Telephone Directory

Your phone can store 20 (including the nine speed dial entries) telephone numbers with names (up to
15 characters for the name and 24 digits for the number in each location) in the handset.

Store a Number/Name in the Directory

1. Press PROG. The screen displays DIRECTORY.
2. Press SELECT. The screen displays ENTER NAME.
3. Using the chart in page 16, enter up to 15 characters for the name you're storing with the number.
Use to backspace and make corrections; use
4. When you finish entering the name, press SELECT or PROG. The screen displays ENTER
NUMBER.
5. Enter the telephone number. Use
to store a pause if necessary.
— OR —
Press REDIAL/PAUSE to display the last number (up to 24 digits) dialed from this handset.
6. Press SELECT or PROG. The screen displays DISTINCT RING? and the current setting.
to choose Y (yes) if you wish the phone to alert you to calls from this number by
7. Press or
changing to a distinctive ringer after the first ring. Choose N for a normal ringer.
8. Press SELECT or PROG to confirm. If you chose Y in Step 7, a
entry.

Edit a Number/Name Stored in the Directory

1. Press . The screen displays DIRECTORY.
2. Press or to scroll alphabetically through entries stored in directory.
— OR —
Press the dial pad key for the first letter of the entry you want to edit.
to advance and add a space.
to backspace and make corrections. Press REDIAL/PAUSE
will be displayed with the directory
www.vtechphones.com
• Press OFF at any
time to exit the
directory.
• When the memory
is full the screen will
display MEMORY
FULL, an error
tone sounds and
you will not be
able to store a
new number until
you delete a stored
number to make
room for another
entry.
BASIC OPERATION 19