Samsung iDCS 500 Technical Manual page 42

iDCS 500 Release 2 / OfficeServ
TECHNICAL MANUAL
LED Name
Displays if the DSP channel are being
DSP
used.
Displays the IPC status between the MGI
IPC
card and the system.
Displays the operation status of the MGI
MOD
card.
MGI 3 LED indication after booting:
RUN
TX
SRV
IPC
3.31 E911 CARD
There are no options to be selected on the E911 card. The card has six (6) LEDs on it
to indicate the card and line status. These indications are described below. Insert the
card into any universal card slot.
ejectors to ensure the card is firmly seated into the back plane connector.
Function
ON ON DIM
BLINKING OFF
ON OFF
ON OFF
(see Figure 3–23)
See figure 3–1.
3.19
Home Page
PART 3 MARCH 2004
•
Off: All channels are not in
use.
•
Blinking (400ms): 1 to 7
channels are in use.
•
Blinking (200ms): 8 to 11
channels are in use.
•
Blinking (100ms): 12 to 15
channels are in use.
•
On: All voice channels (16
channels) are in use.
•
Blinking: IPC is in normal
status.
•
Off: IPC is not in normal a
status
•
OFF: The card has booted
and is operating normally.
•
ON: The card is not
normally on-line.
PWR
RX
DSP
MOD
Push firmly in the middle of both card
Table of Contents
INSTALLATION
Status