Fitting The Harness; Starting / Stopping The Engine - Stihl HL 75 Assembling, Safety Precautions, Operating Instructions, Maintenance

English / USA

Fitting the Harness

3
Shoulder strap
:
Put on the shoulder strap (1).
:
Adjust length until the spring hook
(3) rests against your right hip.
18
1
Full harness*
:
Put on the full harness (2).
:
Adjust length until the spring hook
(3) rests against your right hip.
* see chapter
"Symbols Used in this Manual"
Starting / Stopping
the Engine
2
3
Starting
:
Hold down the trigger interlock (1)
and squeeze the throttle trigger (2).
:
Move the slide control (3) to the
START position.
:
Now release the throttle trigger,
slide control and trigger interlock
in that order. This is the starting
throttle position.
3
2
1
HL 75, HL 75 K