Fitting The Harness - Stihl FS 250 Instruction Manual

Open the tank cap.
N
Fill up with fuel.
N
Closing the Tank Cap
N
WARNING
After fueling, tighten down the filler cap
as securely as possible by hand.
FS 250, FS 250 R

Fitting the Harness

The type and style of the
harness/shoulder strap depend on the
market.
The use of the shoulder strap is
described in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
Shoulder Strap
2
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Balance the machine – see
N
"Balancing the Machine".
Full Harness
1
Put on the harness (1) and close the
N
locking plate (3).
Adjust the length of the strap – with
N
the machine attached, the
carabiner (2) must be about a
hand's width below your right hip.
Balance the machine – see
N
"Balancing the Machine".
English
1
3
2
23