Program Check Function - Omron H5F Instruction Manual

14. Program check function

The days and times at which output turns ON or OFF over the course of
one week can be displayed continuously in the actual order in which they
will occur.
① Press the
TEST
to start program check.The display will flash
[test] and the day and time of the next
change in output status will be displayed.
② Press the
WRITE
to the time of the next change in output status.
(Continue pressing the
the days and times for one week.)
③ If the
WRITE
setting for the week displayed, [end] is
displayed for 2 s and then the Time Switch
automatically returns to run mode.
≪Note≫
• Program check function can be entered from run mode only.
• Press the
TEST
program check function display sequence.
• The [ ] and [
present operation.
• Only ON times are displayed for pulse-output operation.
Key for 2 s min. in run mode
Key.The display will change
WRITE
Key is pressed with the last
Key again to return to run mode before reaching the end of the
] symbols displayed in test mode have no effect on the
Key to display
- 25 -
The color indicates flashing
SU MO TU WE TH FR SA
1 15
PM
te st
PW
In the above example,
output will turn ON at 1:15 pm
on Monday.
SU MO TU WE TH FR SA
5 30
PM
te st
PW
In the above example,
output will turn OFF at 5:30 pm
on Monday.
SU MO TU WE TH FR SA
e nd
PW