Omron H5F Instruction Manual page 33

● Separate Power Supplies for Time Switch and Load
Direct control with
the Time Switch
Power supply
internal
circuit
H5F
Load
Power supply
● Common Power Supply for Time Switch and Load
Direct control with
the Time Switch
Power supply
internal
circuit
H5F
Load
Wire
■Applicable wire : 600V vinyl-insulated wire (solid wire or stranded wire, copper)
■Applicable tightening torque : 8.67 to 10.4 in.lb. (0.98 to 1.17 N·m)
■Recommended fuse : T2A AC250V T2A, 250 VAC, time delay, low breaking
Using with an electromagnetic relay or contactor
If using the Switch beyond its ratings is unavoidable,
use it together with an electromagnetic switch or contactor
Single phase
Power supply
Electromagnetic
contactor
Load
Wire
Using with an electromagnetic relay or contactor
If using the Switch beyond its ratings is unavoidable,
use it together with an electromagnetic switch or contactor
Single phase
Power supply
Electromagnetic
contactor
Load
14 to 24 AWG
Up to two wires of the same size and type can be inserted
into a single terminal. Strip length : 11±1 mm.
capacity
Electromagnetic
Power supply
relay
internal
circuit
H5F
Wire
Wire
Electromagnetic
relay
internal
circuit
H5F
- 32 - - 32 -
Three phase
Power supply Power supply
internal
circuit
H5F
Load
Three phase
Power supply
Wire
internal
circuit
H5F
Load