Falling Prevention - Sharp HT-SB603 Operation Manual

Falling prevention

z Safety wires (not supplied) are useful to prevent the sound bar from falling off.
z 2 persons are required to perform this procedure.
When mounting on the wall
1
Loop the safety wires (not supplied) into each
hole of the wall mount angle as shown.
2
Loop the safety wires from wall mount angle
into each hole of sound bar as shown.
When placing on the shelf/table
Holes
Wall surface
Wall surface
3
Align and fix the sound bar to wall mount angle.
Wall surface
4
Tie the safety wires tightly.
Loop the safety wires (not supplied) into each hole as shown
and tie the safety wires to the TV stand.
E-6
Wall surface