Status Light Troubleshooting Codes - Visioneer Strobe XP 450 User Manual

118 V S
ISIONEER TROBE
Flashing
Problem Description
Code
6 The scanner's cover is open.
9 Paper jam
All Other An internal part in the scanner
Codes may have malfunctioned.
XP 450 S U '
CANNER SER S
S L T
TATUS IGHT ROUBLESHOOTING
A green status light indicates the normal state of the scanner.
N O
ORMAL PERATION
Blinking green: indicates the scanner is waking up from power
■
saving and preparing to scan.
Steady green: indicates the scanner is ready to scan.
■
E C
RROR ODES
If your scanner experiences hardware problems, the status light will
blink red. The number of times it blinks indicates the error code.
The table below describes the error codes.
G
UIDE
C
ODES
Solution
Close the scanner cover and make sure it attaches
completely.
See "Clearing Paper Jams" on page 114.
Re-boot your computer. If the problem persists, contact
Visioneer Technical Support.