Hardware Installation - EnGenius EWS850AP User Manual

Hardware Installation

EWS850AP
1. Connect one end of the Ethernet cable into the LAN
port (PoE) of the AP and the other end to the PoE port
on the PoE adapter.
2. Connect the Power cord with the PoE Adapter and plug
the other end into an electrical outlet.
3. Connect the second Ethernet cable into the LAN port of
the PoE adapter and the other end to the Ethernet port
on the computer.
4. Screw on the provided antennas to the top of this device
5. When all the process is completed, the LED light will be
active as below.
Note: The AP should ONLY be powered via Ethernet cable connected
to the included PoE Adapter EPA5006GR. You can convert the
device to factory default or users default via the reset button on
EPA5006GR.
This diagram depicts the hardware configuration.
16