Table of Contents
Advertisement
Hardware Installation
1. Connect one end of the Ethernet cable into the LAN port
of the Access Point and the other end to the Ethernet
port on the computer.
2. Connect a Power cord with the PoE Adapter and plug
the other end into an electrical outlet.
3. Connect the second Ethernet cable into the LAN port of
this PoE Adapter and the other end to the Ethernet port
on the computer.
Note1: The Access Point can be powered by 802.3af/at
PoE (Power over Ethernet). You can consider to adopt
EnGenius EPA5006GP or EPA5006GAT for powering up
your 11AX device.
Note2: EWS357AP can be driven by IEEE 802.3af and .
EWS377AP should be driven by IEEE802.3at.
1
3
15
2
Advertisement
Table of Contents
