Ssid Profile - EnGenius EWS850AP User Manual

SSID Profile

Current Profile: You can configure up to eight(8)different
SSIDs. If multiple client devices will be accessing the
network, you can arrange the devices into SSID groups.
Click Edit to configure the profile and check whether you
want to enable extra SSID.
The first SSID is default enabled and you can click Edit to
specify the detail setting, including:
Enable: Click the check box to enable specific SSID interface.
The first SSID is default enabled.
SSID: Specifies the SSID name for the current profile.
Hidden SSID: Check this option to hide the SSID from clients.
If checked, the SSID will not appear in the site survey.
Client Isolation: Block the communication between the
accociated clients under the same WLAN.
VLAN Isolation: When this function is checked with
specified VLAN ID in a SSID profile, the traffic from this
SSID will be tagged with this VLAN ID upon entering LAN
bridge.
VLAN ID: Specifies the VLAN tag for each profile. If your
netowrk includes VLANs, you can specify a VLAN ID for
packets pass through the Access Point with a tag.
L2 Isolation: Enable this function prevenet client devices
to communicate on the both WLAN and LAN.
Band Steering: Enable this function to facilitate effective
spectrum usage. 5GHz-capable clients can associate with
AP's 5GHz radio and offloading air utilization in 2.4GHz
band.
36