Troubleshooting - Vision Fitness E3600HRC Owner's Manual

TROUBLESHOOTING YOUR TREADMILL
Our Treadmills are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps may
indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: Check to make sure the Treadmill is connected to a
functioning outlet, and that the Treadmill is turned on.
PROBLEM: The Treadmill's built-in circuit breaker trips repeatedly,
shutting-off for no apparent reason.
SOLUTION: The lubricating wax coating on the deck is wearing
down and needs to be replenished; contact your VISION FITNESS
retailer.
PROBLEM: The Treadmill shuts off when elevated.
SOLUTION: Check to make sure that the power cord is not
stretched so tight that when the Treadmill is elevated the cord is
pulled out of the wall outlet.
PROBLEM: The running belt does not stay in the center of the
Treadmill when you are running on it.
SOLUTION: 1) Check to make sure the Treadmill is level.
2) The running belt is loose and needs to be properly tensioned (see
Page 47 for proper procedure).
PROBLEM: The belt moves within / " of -- but does not touch -- the
1
4
side rail.
SOLUTION: There is nothing wrong, this is normal and will not
cause any damage.
NOTE:
If the above steps do not remedy the problem, discontinue
use, turn the power off and contact your VISION FITNESS retailer.
42
tr eadmills
T 8 6 0 0 S H R C
&