Before you begin… To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding though, enter your new Fitness Cycle’s serial number here: Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Fitness Cycle.
Page 3
TOOLS & HARDWARE INCLUDED Allen Wrench Allen Wrench Screwdriver Wrench L-Shaped Wrench BLUE BAG L x 8 D Bolt BLACK BAG Quantity: 4 M8 x 1.5T Washer L x 8 D Bolt Quantity: 4 Quantity: 4...
HARDWARE INCLUDED ORANGE BAG PINK BAG L x 8 D Bolt L x 8 D Bolt Quantity: 2 Quantity: 6 NyLock Nut Quantity: 2 M8 x 1.5T Lock Washer Quantity: 4 GREEN BAG Seat Rail End Cap Screw Quantity: 2 L x 6 D Bolt Quantity: 4...
Page 5
STEP BLACK BAG STEP • Install the rear foot with the four bolts, using the Blue 5 Allen wrench. ORANGE BAG STEP • Slide the rubber cover onto the console mast. STEP • Unfold the wire and attach it to the string located inside the mast.
Page 6
CONSOLE STEP STEP • Remove the four screws from the back of the console. Plug the wire connector from inside the mast into the console. The cable connector is slotted, so it may only be connected one way; do not force it! •...
Page 7
(M6 1.0T), using the Black-handled 4 Allen wrench. 621-D East Lake Street • P.O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com 2000 Vision Fitness. All Rights Reserved. 5.00 Part #Z26RB35-001 REV2...