Adjusting The Thread End Position At The Beginning Of Sewing - JUKI PS-800-8045 Instruction Manual

4-18. Adjusting the thread end position at the beginning of sewing

❶ ❶
❷ ❷
Wrong side of material
It is possible to set the needle thread end posi-
tion at the beginning of sewing to top side ❶ or
underside ❷ of material.
The condition of the needle thread end is
changed over between the aforementioned two
settings by actuating the function for pulling the
thread by the wiper and for holding the thread by
upward air blow.
❶ To put the needle thread end on the top of
material
The function for pulling the thread by the wiper
and for holding the thread by blowing air upward
is actuated.
❷ To put the needle thread end on the underside
of material
The function for pulling the thread by the wiper
and for holding the thread by blowing air upward
is de-actuated.
– 24 –