Subclass Model; Barcode Reader - JUKI PS-800-8045 Instruction Manual

6. SUBCLASS MODEL

6-1. Barcode reader

WARNING :
Be sure to turn OFF the power supply and air supply to the sewing machine before attaching the
parts in order to protect against accidents caused by an unintended start of the sewing machine.
❸ ❸
❾ ❾
❼ ❼
❹ ❹
❼ ❼
❽ ❽
❸ ❸
❶ ❶
❷ ❷
❺ ❺
60±5mm
– 50 –
1. Installing the parts
1) Secure barcode reader ❷ and mounting plate ❶
with screw ❹ .
No. Part number Part name
❶
40234788 Barcode reader
mounting plate
❷
40235199 Barcode reader
❸
40234468 Screw
❹
40235200 Screw
❺
40235332 Cable clip band
❻
40235331 Barcode
❼
40234514 Washer
❽
40240831 Mounting plate
2) Detach screws ❾ (four pieces) of the operation
panel mounting base. Install mounting plate ❶
under the operation panel mounting base with
screws ❸ (two pieces).
Install mounting plate ❾ under the operation pan-
el mounting base with screws ❸ (two pieces).
3) Adjust the position of barcode reader ❷ so that it
is spaced 60±5 mm. Then, secure it with screw ❹ .
Connect the plug of barcode reader to the pan-
el. Pass cable clip band ❺ through the hole in
mounting plate ❶ and bundle the barcode reader
cable with the cable clip band.
When bundling the barcode cable, slightly
loosen the cable near the barcode reader.
Quantity
1
1
4
2
1
1
2
1