JUKI PS-800-8045 Instruction Manual page 49

No. Region
Lubricate the hook oil tank.
3
Adding the lubricating oil to the gear box.
4
❸
❶ ❶
❷ ❷
❷
❶
❹
Explanation
1. Detach cover ❶ .
2. Remove rubber plug ❷ of the
oil tank.
3. Pour accessory (or specified)
oil to the oil tank through the
rubber plug hole.
4. When the oil amount in the oil
tank reaches the upper scale
mark, stop pouring oil.
5. Return the rubber plug to and
return the cover to their original
positions.
1. Remove screw ❶ . Detach
hook cover ❷ .
Remove screw ❸ . Detach gear
box cover ❹ and gasket.
2. Lubricate the gear box with
white oil No. 32 little by little.
3. When the oil amount reaches
the half of diameter of master
wheel, stop lubrication.
Return the cover of the gear
box, gasket, cover and hook
cover to their original positions
and tighten screws.
– 46 –
Operating time
If the oil level in the
oil tank drops below
the lower scale
marker, replenish
the oil tank with
the accessory (or
specified) oil.