JUKI PS-800-8045 Instruction Manual page 57

● Cancelling the barcode number
When you want to cancel the barcode reader number, it is necessary to set the current number to the largest
value (the largest one of unassigned numbers, such as 100) first. Then, change that number to "0".
Example)
1 2
↓
1 2
↓
● How to use the barcode reader
A
3 4 5
0
3 4 5
7 (or 8 to 100)
B
When the number "3" is changed to "0", the subse-
6
quent numbers registered "4, 5 and 6" will also be
erased.
To prevent the aforementioned erasure of registered
6
numbers you do not want to erase, firstly set the bar-
code number to the largest available value "7", then
change it to "0".
1) Press button A to lock the pattern change.
The barcode is rendered effective by
locking the pattern change.
When the pattern change is locked,
pattern list B is displayed in gray.
2) Place the barcode seal in the cassette right under
the barcode reader.
When the barcode reader recognizes the bar-
code, the barcode reader beeps.
If the barcode reader does not beep,
adjust the vertical position of the
barcode reader.
If the pattern is not changed even when
the machine produces sound, check the
self lock status.
3) Check to make sure that the pattern has been
changed.
– 54 –