6-2-7-3. Setting the references
Start the machine and proceed to the main interface.
Then, click "Next" ❶ . Click "Move frame" ❷ , "Head
Offset" ❸ , and the "Head 2 displacement". Enter
"98.5" in the X-axis direction field and "54.5" in the
Y-axis direction field (The head 2 position should be
adjusted according to the cutting position and the
displacement of sewing position. The smaller the
X-axis travel amount is entered, the more the knife
position is moved to the left. The smaller the Y-axis
travel amount is entered, the closer the sewing posi-
tion that faces to the knife position is brought to the
❶
work position).
❷
❸
– 65 –