Sony MSU-900 Operation Manual page 75

To restore the previous setting, press
[Set]
instead of .
3
To set the time:
[Time]
1 Press and highlight
Date/ Time Set
2004/12/22
( WED )
11: 47: 00
Date Time
Hour Minute
11 47
2 Set the Hour, Minute and Second with the left three
controls.
[Set]
3 Press in synchronization with a time signal.
The set time becomes valid.
To restore the previous setting, press
[Set]
of .
When the clock setting is completed
[Exit]
Press to exit this menu.
To adjust the buzzer sound
A buzzer sounds on the MSU-900/950 when it receives a
call signal or a panel control is operated.
When required, you may turn on/off the buzzer or adjust
the sound volume.
1
[MSU Adjusting]
Press
menu.
The MSU adjustment menu appears.
Clear
Auto Iris
LED LCD Bright
Buzzer
Bright /Contrast
2
[Buzzer]
Press to set it to highlighted.
The lower half of the display becomes the Buzzer
Volume Level adjustment display.
[Cancel]
.
Exit
Set Cancel
Second
51
[Cancel]
instead
on the MSU Configuration
Exit
1
1
Clear
LED LCD Bright
Buzzer
Bright /Contrast
Buzzer Volume Level
Call Touch
Buzzer Click
Call Touch
30 85
3
Adjust the levels with the three control knobs.
Call: Sound volume of the buzzer when a call signal is
received
Touch: Sound volume of the buzzer when a button
displayed on the menu display is operated
Switch: Sound volume of the buzzer when a button on
the panel is operated
The master volume can be adjusted with the right-most
control knob (Master).
To turn on/off the buzzers independently
Press the corresponding button. When the button is
highlighted, the buzzer is on.
[Call Buzzer]
: For the buzzer sound when a call signal is
received
[Touch Click]
: For the buzzer sound when a button
displayed on the menu display is operated
[Switch Click]
: For the buzzer sound when a button on the
panel is operated
To turn off all the buzzers
[All Off]
Press and highlight
When the adjustment is completed
[Home]
Press to return to the MSU adjustment menu, and
[Exit]
press to exit this menu.
To adjust the brightness of the LEDs
You can adjust the brightness of the LEDs of the panel
buttons and camera number/tally indication window.
1
[MSU Adjusting]
Press
menu.
The MSU adjustment menu appears.
2
[LED Bright]
Press and highlight
The lower half of the display becomes the LED
Brightness adjustment display.
Home
1
1
Switch
All Off
Click
Switch Master
68 66
.
on the MSU Configuration
.
Initial Settings
75