Sony MSU-900 Operation Manual page 51

MULTI: Selects the Multi-Control menu to set the
requirements for Master/Slave mode when setting up
multiple cameras in synchronization.
CONFIG: Selects the Configuration menu to configure
this unit and the entire camera system.
MAINTENANCE: Selects the Maintenance menu to set
various camera maintenance items and the H and SC
phases of the CCU, etc.
FILE: Selects the File control menu to retrieve and
transfer reference files, lens files, and scene files in the
camera or on a "Memory Stick."
PAINT: Selects the Paint control menu to adjust various
paint items, such as white, black, and flare.
Note
The Function and Scene file operation menus are
preemptive to other menus.
For the items on each menu, see "Menu Items" on page 61.
b LCD (liquid crystal display)/touch panel
Displays the menu selected with the MODE buttons and
permits the displayed items to be adjusted.
c Control knobs (rotary encoders)
Adjust the selected items on the touch panel.
0 "Memory Stick" insertion block
MSU-900
a "Memory Stick" slot
MSU-950
a "Memory Stick" slot
a "Memory Stick" slot
Insert a "Memory Stick" to store reference files, lens files,
and scene files from the camera or CCU.
This slot also permits software installation for version
upgrades to this unit.
b ACCESS indicator
b ACCESS indicator
To insert a "Memory Stick"
Insert the "Memory Stick" into the slot so that the labeled
side of the stick faces you.
When the "Memory Stick" is correctly set, the ACCESS
indicator lights in green. If the indicator stays dark, the
"Memory Stick" may be inserted incorrectly. Check the
stick and reinsert it.
To eject the "Memory Stick," press it.
Note
Do not eject a "Memory Stick" when the ACCESS
indicator is lit in red (which means that data is being read
from or written to the "Memory Stick").
This may erase data stored in the "Memory Stick."
For details, see "About "Memory Stick" Media" on page
78.
b ACCESS indicator
Shows the status of the "Memory Stick."
Indication Meaning or measures
Off No "Memory Stick" is inserted.
Lit in green There is a "Memory Stick" in the slot.
Lit in red Data is being read/written. If you eject the
"Memory Stick" in this condition, the data is
not guaranteed. All the data may be lost.
qa Scene file control block
a Scene file number display window
b SCENE FILES buttons
1 2
SCENE FILES
a Scene file number display window
The number of the selected scene file (1 to 32) is displayed
in the window.
If the selected number is 5 or less, the corresponding
SCENE FILES button lights simultaneously.
b SCENE FILES buttons
While the STORE button is flashing: When you press
one of these buttons, the current setting data is stored as
a file of the corresponding number.
When the STORE button is dark: The stored data can be
retrieved by pressing and lighting up the button of the
desired number. Press the lit button to turn it dark and
resume the previous status.
c STORE button
3 4 5
STORE
Locations and Functions of Parts
51