Sony MSU-900 Operation Manual page 48

6 STANDARD button
When you press this button, the camera is initialized to its
standard state and the button lights for several seconds.
If you press the button while it lights, the camera returns to
the state before the button was lit.
For details, refer to the System Manual.
7 AUTO SETUP block
For automatic adjustments of cameras.
a Auto adjustment item select buttons
AUTO SETUP
SKIN DTL LEVEL START/
AUTO HUE
a Auto adjustment item select buttons
Press and light up these buttons to select the items to be
automatically adjusted.
SKIN DTL AUTO HUE: Skin tone detail automatic hue
LEVEL: Gamma balance, knee point, master black level,
etc.
b START/BREAK button
Press to start automatic adjustment of the selected items.
The button lights during adjustment and goes dark when
adjustment is completed.
If you press the button when lit, the automatic adjustment
is canceled and the button flashes. To stop the flashing,
press the button again.
c WHITE (white balance) button
Press to automatically adjust the white balance.
The button lights during adjustment and goes dark when
adjustment is completed.
If you press this button when lit or the START/BREAK
button, the automatic adjustment is canceled and the button
flashes. To stop the flashing, press the button again.
d BLACK (black balance) button
Press to automatically adjust the black balance and black
set.
The button lights during adjustment and goes dark when
adjustment is completed.
If you press this button when lit or the START/BREAK
button, the automatic adjustment is canceled and the button
flashes. To stop the flashing, press the button again.
Note
If an error occurs during adjustment, the pressed button
flashes.
48
Locations and Functions of Parts
b START/BREAK button
c WHITE button
d BLACK button
BREAK WHITE BLACK
8 Camera/CCU function ON/OFF buttons
Various functions of the camera or the CCU can be turned
on and off from this unit.
With the factory default settings, the following switch
functions are assigned to 19 buttons on the MSU-900, and
4 buttons on the MSU-950. The MSU-900 has eight spare
buttons, and the MSU-950 has four spare buttons.
MSU-900
KNEE DETAIL LVL DEP GAMMA CHROMA
OFF OFF OFF OFF OFF
KNEE KNEE
LOW KEY
APERTURE SAT
SAT
5600K AUTO SKIN DETAIL SATURATION CONTRAST
KNEE DETAIL GATE
For the MSU-950, see the next page.
Upper row (OFF when the button is lit)
KNEE OFF: Knee compensation function
DETAIL OFF: Detail compensation function
LVL DEP OFF: Level dependent function which
controls the details in the dark part of a picture
GAMMA OFF: Gamma function
CHROMA OFF: Chroma function
MATRIX OFF: Linear matrix function to enhance color
fidelity
• Middle row (ON when the button is lit)
KNEE APERTURE: Knee aperture function
KNEE SAT: Knee saturation function
LOW KEY SAT: To turn on/off the low key saturation
function (linear matrix for dark areas)
MONO COLOR: Mono color function which mixes the
chroma signals of a single hue with the luminance
signal. The chroma level is modulated according to
the luminance signal.
COLOR CORRECT: Color correction function for a
certain hue range
• Lower row (ON when the button is lit)
5600K: 5600K electric color temperature conversion
function
AUTO KNEE: Auto knee function. When this button is
lit (ON), the knee point is automatically adjusted
according to the light content of the picture.
SKIN DETAIL: Skin tone detail function
DETAIL GATE: Skin tone detail gate function. When
this button is lit (ON), the adjustment range of the
skin tone detail is displayed in white on the monitor
screen.
SATURATION: Saturation function
CONTRAST: Contrast function
BLACK GAMMA: Black gamma function
MATRIX
OFF
MONO COLOR
COLOR CORRECT
BLACK CHARACTER
GAMMA