Sony MSU-900 Operation Manual page 73

MSU Configuration
MSU MSU SW
Adjusting Set
Date /
Time
3
[Security]
Press .
The Security Menu appears.
Security Menu
Engineer Mode
4
[Engineer Mode]
Press and highlight
The numeric keys and field for entering the code No.
are displayed.
Engineer Mode
Code No:
OK
5
Enter the security code using the numeric keys, then
[OK]
press .
Note
Each digit you input will be displayed as an asterisk.
The Security Menu items appear.
Exit
Security
Exit
.
7 8 9
4 5 6
1 2 3
0
Cancel
Security Menu
Engineer Mode
Code
Status
Change
Engineer Mode
6
[Status]
Press .
The Security Status setting display appears.
Security Status
Engineer Mode
Ref. Lens
Enable Enable Enable
Engineer Mode
View
Paint
Full Lock
Mode
Only
7
Set the statuses for control from the MSU-900/950.
[Ref. Enable]
: Set it to highlighted to enable the
setting in the reference file (Factory setting: ON).
[Lens Enable]
: Set it to highlighted to enable the
setting in the lens files (Factory setting: ON).
[OHB Enable]
: Set it to highlighted to enable the
setting in the OHB files (Factory setting: ON).
[Full Lock]
: Set it to highlighted to fully disable the
MSU-900/950 (Factory setting: OFF).
[View Mode]
: Set it to highlighted to disable all
operations from the MSU-900/950 other than data
reference (Factory setting: OFF). (Only the display
and indicators will be active. Any settings and
adjustments will be disabled.)
[Paint Only]
: Set it to highlighted to enable paint
control only (Factory setting: OFF).
8
When the status settings are completed, press
The Security Menu display in step 5 is restored.
9
[Engineer Mode]
Press
The statuses specified in step 7 become valid.
Note
All operations are enabled in Engineer mode regardless of
the above status settings.
Exit
Exit
OHB
[Exit]
to exit Engineer mode.
Initial Settings
.
73