Sony MSU-900 Operation Manual page 55

e Active indicators
Show the control status of the corresponding cameras 1
through 12 (when the EXPAND button is not lit) or 13
through 24 (when the EXPAND button is lit).
The indicators for the cameras under control of this unit
light in green and the indicators for the cameras under
control of another control panel light in orange.
An indicator whose corresponding camera (or camera
control unit) is not connected does not light.
An indicator lights in red when an error is detected and the
self-diagnostic functions are activated in the
corresponding camera or camera control unit.
f Camera select buttons
Select the cameras to be controlled from this unit. Press
and light up the button corresponding to each desired
camera.
Cameras 1 through 12 are selected when the EXPAND
button is not lit, and cameras 13 through 24 are selected
when the EXPAND button is lit.
g Expand camera number indicators
When the EXPAND button is lit, the numbers of cameras
13 through 24 corresponding to the pressed camera select
buttons (1 through 12) are displayed here.
h EXPAND button
Press to select the group to be selected with the camera
select buttons.
Cameras 1 through 12 can be selected when this button is
not lit, and cameras 13 through 24 can be selected when
this button is lit.
Note
An appropriate camera command network unit (CNU-700,
etc.) is required to control multiple cameras using the
camera select function.
qh Filter control block
(MSU-900 only)
a FILTER CTRL button
1
FILTER CTRL
A
a FILTER CTRL (filter control) button
Press and light up the button to enable filter selection with
the CC and ND filter select buttons of this unit.
b ND buttons
2 3 4 5
ND
B C D E
CC
c CC buttons
b ND (ND filter select) buttons
While the FILTER CTRL button is lit, press and light up
one of these buttons to select the corresponding ND filter.
Examples
1: Clear
2: 1/4 ND
3: 1/8 ND
4: 1/16 ND
5: 1/64 ND
When the FILTER CTRL button is not lit, the button
corresponding to the filter selected at the camera lights.
c CC (color temperature conversion filter select)
buttons
While the FILTER CTRL button is lit, press and light up
one of these buttons to select the corresponding CC filter.
Examples
A: Cross filter
B: 3200K (clear)
C: 4300K
D: 6300K
E: 8000K
When the FILTER CTRL button is not lit, the button
corresponding to the filter selected at the camera lights.
qj IRIS/MB ACTIVE (iris/master black active) button
Press and light up this button to enable the iris and master
black adjustment functions of this unit.
When the PANEL ACTIVE button is pressed, this button
automatically lights. To disable only the iris/master black
control block of the panel, press this button so that it goes
dark.
qk MASTER BLACK control block
Turn the control to adjust the master black level.
The adjustment value is displayed in the display window.
ql CALL button
Press to send a call signal to the camera, on which the
CALL button lights. The tally lamps on the camera and the
red tally lamp on the CCU light when not lit, or go dark
when lit.
When the CALL button on the camera is pressed, the
CALL button on this unit lights and a buzzer sounds.
w; Camera number/tally indication window
The number of the camera being controlled from this unit
is displayed in orange.
When a red tally signal is sent to the camera, the number is
displayed in black and the background of the number lights
in red.
When a green tally signal is sent to the camera, the number
is displayed in black and the background of the number
lights in green.
Locations and Functions of Parts
55