Mac Filter; Chapter 13 Mac Filter; Mac Filter Overview - ZyXEL Communications LTE Series User Manual

13.1 MAC Filter Overview

You can configure the Zyxel Device to permit access to clients based on their MAC addresses in the
MAC Filter screen. This applies to wired and wireless connections. Every Ethernet device has a unique
MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses
of the LAN client to configure this screen.

13.2 MAC Filter

Enable MAC Address Filter and add the host name and MAC address of a LAN client to the table if you
wish to allow or deny them access to your network. Select Security > MAC Filter. The screen appears as
shown.
Figure 113 Security > MAC Filter
You can choose to enable or disable the filters per entry; make sure that the check box under Active is
selected if you want to use a filter, as shown in the example below.
C
LTE Series User's Guide
147
H A P T E R

MAC Filter

13