ZyXEL Communications LTE Series User Manual page 69

Figure 49 Network Setting > Wireless > WPS
The following table describes the labels in this screen.
Table 26 Network Setting > Wireless > WPS
LABEL DESCRIPTION
General
WPS Click to enable (
Add a new device with WPS Method
Method 1 PBC Use this section to set up a WPS WiFi network using Push Button Configuration (PBC). Click this
switch to make it turn blue. Click Apply to activate WPS method 1 on the Zyxel Device.
WPS Click this button to add another WPS-enabled WiFi device (within WiFi range of the Zyxel
Device) to your WiFi network. This button may either be a physical button on the outside of a
device, or a menu button similar to the WPS button on this screen.
Note: You must press the other WiFi device's WPS button within two minutes of
Method 2 PIN Use this section to set up a WPS
Device. Click this switch to make it turn blue. Click Apply to activate WPS method 2 on the Zyxel
Device.
Chapter 6 Wireless
) and have the Zyxel Device activate WPS. Otherwise, it is disabled.
pressing this button.
WiFi
LTE Series User's Guide
69
network by entering the PIN of the client into the Zyxel