Dns Route; Add/Edit Dns Route - ZyXEL Communications LTE Series User Manual

8.3 DNS Route

Configure how domain name - IP address mapping queries are forwarded from the Zyxel Device to a
DNS (Domain Name System) server if your Zyxel Device has multiple WAN interfaces. Click Network
Setting > Routing > DNS Route to open the DNS Route screen.
Figure 87 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
Table 39 Network Setting > Routing > DNS Route
LABEL
Add New DNS
Route
#
Status
Domain Name
WAN Interface
Subnet Mask
Modify

8.3.1 Add/Edit DNS Route

Click Add New DNS Route in the DNS Route screen, use this screen to configure the required information
for a DNS route.
Chapter 8 Routing
DESCRIPTION
Click this to create a new entry.
This is the number of an individual DNS route.
This field indicates whether the rule is active (yellow bulb) or not (gray bulb).
This is the domain name to which the DNS route applies.
This is the WAN interface through which the matched DNS request is routed.
This parameter specifies the IP network subnet mask.
Click the Edit icon to configure a DNS route on the Zyxel Device.
Click the Delete icon to remove a DNS route from the Zyxel Device.
LTE Series User's Guide
113